| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • You already know Dokkio is an AI-powered assistant to organize & manage your digital files & messages. Very soon, Dokkio will support Outlook as well as One Drive. Check it out today!

View
 

MendoMeasurements

Page history last edited by PBworks 17 years, 5 months ago

Assembly

Make an assembly of all the parts below:

Save your assembly file as mendoassembly.skp

Delete the person that sketchup adds to your file before you start to design.

 

base

9" inches long

3 3/4" wide

3/4" high

3/8 depth of grooves

1/2" width of grooves

2 1/4 distance of groove from end of base

Save as basewithgrooves.skp

 

upright

3 3/4" square

3/4" inches thick

save as upright.skp

 

mirror

3 3/4" square

1/8" thick

save as mirror.skp

 

Magnet

1 1/8" diameter

3/8" hole

1/4" thick

1/16 chamfer on edges

save as magnet.skp

 

Rotor post

3/8" diameter, 8" long

.03" hole in each end, 3/8" deep

 

Rotor block

start with a 1" square

3/8" hole in center

5/16" depth of grooves on all 4 corners

1/4" width of grooves on all 4 corners

2" length of extrusion for block

Comments (0)

You don't have permission to comment on this page.