Assembly
Make an assembly of all the parts below:
Save your assembly file as mendoassembly.skp
Delete the person that sketchup adds to your file before you start to design.
base
9" inches long
3 3/4" wide
3/4" high
3/8 depth of grooves
1/2" width of grooves
2 1/4 distance of groove from end of base
Save as basewithgrooves.skp
upright
3 3/4" square
3/4" inches thick
save as upright.skp
mirror
3 3/4" square
1/8" thick
save as mirror.skp
Magnet
1 1/8" diameter
3/8" hole
1/4" thick
1/16 chamfer on edges
save as magnet.skp
Rotor post
3/8" diameter, 8" long
.03" hole in each end, 3/8" deep
Rotor block
start with a 1" square
3/8" hole in center
5/16" depth of grooves on all 4 corners
1/4" width of grooves on all 4 corners
2" length of extrusion for block